SMACO Instructions

SMACO MINI SCUBA TANK Tutorials

Refill Adapter

IMPORTANT Refill Adapter INFO:
The pressure of the gas cylinder used for refilling must be higher than 3000Psi/200Bar.
When inflating, avoid opening the inflation valve too quickly or at a high pressure. The inflation should be done at a moderate pace to ensure a controlled and safe process.
Moderate inflation: When inflating the cylinder, it is important to inflate it moderately and avoid overinflation. Overinflating can potentially damage the cylinder or pose safety risks.

Hand Pump

 IMPORTANT HAND PUMP INFO:

Take a short break every 2.5 minutes to allow the pump to cool.
Do not fill above 3000 PSI / 200 BAR.
Always refer to the pressure gauge on the Smaco Tank.

Air Compressor

 

 

IMPORTANT FILTER INFO:
Replace Large Filter, Small Filter & Carbon Balls after every 5 tank fills.
Replacement filters can be purchased on our site.

Cleaning Cylinders

 

For more installation and maintenance videos, you can click here Use Tutorial to learn more, or enter our YouTube:SMACOSCUBA